How to configure cap_ipc_lock and cap_sys_nice capabilities in Docker

Question

When running ClickHouse in Docker, Docker is complaining about the lack of CAP_IPC_LOCK and CAP_SYS_NICE capabilities in the system. How can I resolve it?

Here is what the no CAP_SYS_NICE or CAP_SYS_NICE capability log messages look like:

docker run -d --name clickhouse-server \
    --ulimit nofile=262144:262144 \
    --network clickhouse-net \
    -p 8123:8123 -p 9000:9000 -p 9009:9009 -p 9363:9363 \
    clickhouse/clickhouse-server:23.2

04.19 08:04:10.022720 [ 1 ] {} <Information> Application: It looks like the process has no CAP_IPC_LOCK capability, binary mlock will be disabled. It could happen due to incorrect ClickHouse package installation. You could resolve the problem manually with 'sudo setcap cap_ipc_lock=+ep /usr/bin/clickhouse'. Note that it will not work on 'nosuid' mounted filesystems.

04.19 08:04:10.065860 [ 1 ] {} <Information> Application: It looks like the process has no CAP_SYS_NICE capability, the setting 'os_thread_priority' will have no effect. It could happen due to incorrect ClickHouse package installation. You could resolve the problem manually with 'sudo setcap cap_sys_nice=+ep /usr/bin/clickhouse'. Note that it will not work on 'nosuid' mounted filesystems.

Answer

Add two --cap-add arguments to provide the container with the IPC_LOCK and SYS_NICE capabilities:

docker run -d --name clickhouse-server \
   --cap-add=SYS_NICE \
   --cap-add=IPC_LOCK \
   --ulimit nofile=262144:262144 \
   --network clickhouse-net \
   -p 8123:8123 -p 9000:9000 -p 9009:9009 -p 9363:9363 \
   clickhouse/clickhouse-server:23.2

Check that the capabilities are visible in the container using the following command:

apt-get update > /dev/null && apt-get install -y libcap2-bin > /dev/null && capsh --print

The response is similar to:

debconf: delaying package configuration, since apt-utils is not installed
WARNING: libcap needs an update (cap=40 should have a name).
Current: = cap_chown,cap_dac_override,cap_fowner,cap_fsetid,cap_kill,cap_setgid,cap_setuid,cap_setpcap,cap_net_bind_service,cap_net_raw,cap_ipc_lock,cap_sys_chroot,cap_sys_nice,cap_mknod,cap_audit_write,cap_setfcap+ep
Bounding set =cap_chown,cap_dac_override,cap_fowner,cap_fsetid,cap_kill,cap_setgid,cap_setuid,cap_setpcap,cap_net_bind_service,cap_net_raw,cap_ipc_lock,cap_sys_chroot,cap_sys_nice,cap_mknod,cap_audit_write,cap_setfcap
Ambient set =
Securebits: 00/0x0/1'b0
 secure-noroot: no (unlocked)
 secure-no-suid-fixup: no (unlocked)
 secure-keep-caps: no (unlocked)
 secure-no-ambient-raise: no (unlocked)
uid=0(root) euid=0(root)
gid=0(root)
groups=0(root)
Guessed mode: UNCERTAIN (0)

Manually set both the capabilities for ClickHouse

setcap "cap_ipc_lock=+ep cap_sys_nice=+ep" /usr/bin/clickhouse

Check that the capabilities are applied.

getcap -v /usr/bin/clickhouse

You should see the following:

/usr/bin/clickhouse = cap_ipc_lock,cap_sys_nice+ep

Restart the ClickHouse server and the log messages should not be shown.

Check out this article on Linux capabilities for more details.

Question​

Answer​

Question

Answer