> ## Documentation Index
> Fetch the complete documentation index at: https://clickhouse.com/docs/llms.txt
> Use this file to discover all available pages before exploring further.

> PromQL の irate や idelta のような計算向けに、時系列データを再サンプリングするための集約関数

# timeSeriesLastTwoSamples

<div id="timeSeriesLastTwoSamples">
  ## timeSeriesLastTwoSamples
</div>

導入バージョン: v25.6.0

PromQL の `irate` や `idelta` のような計算のために、時系列データを再サンプリングするための集約関数です。

この集約関数は、時系列データをタイムスタンプと値のペアとして受け取り、最新のサンプルを最大 2 件だけ保持します。これは、グリッドに揃えたタイムスタンプに対する再サンプリングの時系列データを保存する materialized view および集約テーブルと組み合わせて使用することを想定しています。

集約テーブルには、揃えられた各タイムスタンプについて直近 2 つの値だけが保存されます。これにより、生テーブルに保存されているデータよりもはるかに少ない量を読み取るだけで、PromQL の `irate` や `idelta` のような計算を実行できます。

<Warning>
  この関数は実験的機能です。`allow_experimental_ts_to_grid_aggregate_function=true` を設定して有効にしてください。
</Warning>

**構文**

```sql theme={null}
timeSeriesLastTwoSamples(timestamp, value)
```

**引数**

* `timestamp` — サンプルのタイムスタンプ。[`DateTime`](/docs/ja/reference/data-types/datetime) または [`DateTime64`](/docs/ja/reference/data-types/datetime64) または [`(U)Int*`](/docs/ja/reference/data-types/int-uint) または [`Int*`](/docs/ja/reference/data-types/int-uint)
* `value` — タイムスタンプに対応する時系列の値。[`Float32`](/docs/ja/reference/data-types/float) または [`Float64`](/docs/ja/reference/data-types/float)

**戻り値**

長さが 0～2 の、同じ長さの Array のペアを返します。1 つ目の Array にはサンプリングされた時系列のタイムスタンプが含まれ、2 つ目の Array には対応する時系列の値が含まれます。[`Tuple(Array(DateTime), Array(Float64))`](/docs/ja/reference/data-types/tuple)

**例**

**生データ用のテーブルの例と、再サンプリングしたデータを保存するためのテーブル**

```sql title=Query theme={null}
SET allow_experimental_time_series_aggregate_functions = 1;
-- Table for raw data
CREATE TABLE t_raw_timeseries
(
    metric_id UInt64,
    timestamp DateTime64(3, 'UTC') CODEC(DoubleDelta, ZSTD),
    value Float64 CODEC(DoubleDelta)
)
ENGINE = MergeTree()
ORDER BY (metric_id, timestamp);

-- Table with data re-sampled to bigger (15 sec) time steps
CREATE TABLE t_resampled_timeseries_15_sec
(
    metric_id UInt64,
    grid_timestamp DateTime('UTC') CODEC(DoubleDelta, ZSTD), -- Timestamp aligned to 15 sec
    samples AggregateFunction(timeSeriesLastTwoSamples, DateTime64(3, 'UTC'), Float64)
)
ENGINE = AggregatingMergeTree()
ORDER BY (metric_id, grid_timestamp);

-- MV for populating re-sampled table
CREATE MATERIALIZED VIEW mv_resampled_timeseries TO t_resampled_timeseries_15_sec
(
    metric_id UInt64,
    grid_timestamp DateTime('UTC') CODEC(DoubleDelta, ZSTD),
    samples AggregateFunction(timeSeriesLastTwoSamples, DateTime64(3, 'UTC'), Float64)
)
AS SELECT
    metric_id,
    ceil(toUnixTimestamp(timestamp + interval 999 millisecond) / 15, 0) * 15 AS grid_timestamp, -- Round timestamp up to the next grid point
    initializeAggregation('timeSeriesLastTwoSamplesState', timestamp, value) AS samples
FROM t_raw_timeseries
ORDER BY metric_id, grid_timestamp;

-- Insert some data
INSERT INTO t_raw_timeseries(metric_id, timestamp, value) SELECT number%10 AS metric_id, '2024-12-12 12:00:00'::DateTime64(3, 'UTC') + interval ((number/10)%100)*900 millisecond as timestamp, number%3+number%29 AS value FROM numbers(1000);

-- Check raw data
SELECT *
FROM t_raw_timeseries
WHERE metric_id = 3 AND timestamp BETWEEN '2024-12-12 12:00:12' AND '2024-12-12 12:00:31'
ORDER BY metric_id, timestamp;
```

```response title=Response theme={null}
3    2024-12-12 12:00:12.870    29
3    2024-12-12 12:00:13.770    8
3    2024-12-12 12:00:14.670    19
3    2024-12-12 12:00:15.570    30
3    2024-12-12 12:00:16.470    9
3    2024-12-12 12:00:17.370    20
3    2024-12-12 12:00:18.270    2
3    2024-12-12 12:00:19.170    10
3    2024-12-12 12:00:20.070    21
3    2024-12-12 12:00:20.970    3
3    2024-12-12 12:00:21.870    11
3    2024-12-12 12:00:22.770    22
3    2024-12-12 12:00:23.670    4
3    2024-12-12 12:00:24.570    12
3    2024-12-12 12:00:25.470    23
3    2024-12-12 12:00:26.370    5
3    2024-12-12 12:00:27.270    13
3    2024-12-12 12:00:28.170    24
3    2024-12-12 12:00:29.069    6
3    2024-12-12 12:00:29.969    14
3    2024-12-12 12:00:30.869    25
```

**タイムスタンプ '2024-12-12 12:00:15' と '2024-12-12 12:00:30' の直近 2 つのサンプルをクエリする**

```sql title=Query theme={null}
SET allow_experimental_time_series_aggregate_functions = 1;
-- Table for raw data
CREATE TABLE t_raw_timeseries
(
    metric_id UInt64,
    timestamp DateTime64(3, 'UTC') CODEC(DoubleDelta, ZSTD),
    value Float64 CODEC(DoubleDelta)
)
ENGINE = MergeTree()
ORDER BY (metric_id, timestamp);

-- Table with data re-sampled to bigger (15 sec) time steps
CREATE TABLE t_resampled_timeseries_15_sec
(
    metric_id UInt64,
    grid_timestamp DateTime('UTC') CODEC(DoubleDelta, ZSTD), -- Timestamp aligned to 15 sec
    samples AggregateFunction(timeSeriesLastTwoSamples, DateTime64(3, 'UTC'), Float64)
)
ENGINE = AggregatingMergeTree()
ORDER BY (metric_id, grid_timestamp);

-- MV for populating re-sampled table
CREATE MATERIALIZED VIEW mv_resampled_timeseries TO t_resampled_timeseries_15_sec
(
    metric_id UInt64,
    grid_timestamp DateTime('UTC') CODEC(DoubleDelta, ZSTD),
    samples AggregateFunction(timeSeriesLastTwoSamples, DateTime64(3, 'UTC'), Float64)
)
AS SELECT
    metric_id,
    ceil(toUnixTimestamp(timestamp + interval 999 millisecond) / 15, 0) * 15 AS grid_timestamp, -- Round timestamp up to the next grid point
    initializeAggregation('timeSeriesLastTwoSamplesState', timestamp, value) AS samples
FROM t_raw_timeseries
ORDER BY metric_id, grid_timestamp;

-- Insert some data
INSERT INTO t_raw_timeseries(metric_id, timestamp, value) SELECT number%10 AS metric_id, '2024-12-12 12:00:00'::DateTime64(3, 'UTC') + interval ((number/10)%100)*900 millisecond as timestamp, number%3+number%29 AS value FROM numbers(1000);

-- Check re-sampled data
SELECT metric_id, grid_timestamp, (finalizeAggregation(samples).1 as timestamp, finalizeAggregation(samples).2 as value)
FROM t_resampled_timeseries_15_sec
WHERE metric_id = 3 AND grid_timestamp BETWEEN '2024-12-12 12:00:15' AND '2024-12-12 12:00:30'
ORDER BY metric_id, grid_timestamp;
```

```response title=Response theme={null}
3    2024-12-12 12:00:15    (['2024-12-12 12:00:14.670','2024-12-12 12:00:13.770'],[19,8])
3    2024-12-12 12:00:30    (['2024-12-12 12:00:29.969','2024-12-12 12:00:29.069'],[14,6])
```

**生データから idelta と irate を計算する**

```sql title=Query theme={null}
SET allow_experimental_time_series_aggregate_functions = 1;
-- Table for raw data
CREATE TABLE t_raw_timeseries
(
    metric_id UInt64,
    timestamp DateTime64(3, 'UTC') CODEC(DoubleDelta, ZSTD),
    value Float64 CODEC(DoubleDelta)
)
ENGINE = MergeTree()
ORDER BY (metric_id, timestamp);

-- Insert some data
INSERT INTO t_raw_timeseries(metric_id, timestamp, value) SELECT number%10 AS metric_id, '2024-12-12 12:00:00'::DateTime64(3, 'UTC') + interval ((number/10)%100)*900 millisecond as timestamp, number%3+number%29 AS value FROM numbers(1000);

-- The aggregated table stores only last 2 values for each 15-second aligned timestamp.
-- This allows to calculate PromQL-like irate and idelta by reading much less data then is stored in the raw table.

WITH
    '2024-12-12 12:00:15'::DateTime64(3,'UTC') AS start_ts,       -- start of timestamp grid
    start_ts + INTERVAL 60 SECOND AS end_ts,   -- end of timestamp grid
    15 AS step_seconds,   -- step of timestamp grid
    45 AS window_seconds  -- "staleness" window
SELECT
    metric_id,
    timeSeriesInstantDeltaToGrid(start_ts, end_ts, step_seconds, window_seconds)(timestamp, value),
    timeSeriesInstantRateToGrid(start_ts, end_ts, step_seconds, window_seconds)(timestamp, value)
FROM t_raw_timeseries
WHERE metric_id = 3 AND timestamp BETWEEN start_ts - interval window_seconds seconds AND end_ts
GROUP BY metric_id;
```

```response title=Response theme={null}
3    [11,8,-18,8,11]    [12.222222222222221,8.88888888888889,1.1111111111111112,8.88888888888889,12.222222222222221]
```

**再サンプリングしたデータから idelta と irate を計算する**

```sql title=Query theme={null}
SET allow_experimental_time_series_aggregate_functions = 1;
-- Table for raw data
CREATE TABLE t_raw_timeseries
(
    metric_id UInt64,
    timestamp DateTime64(3, 'UTC') CODEC(DoubleDelta, ZSTD),
    value Float64 CODEC(DoubleDelta)
)
ENGINE = MergeTree()
ORDER BY (metric_id, timestamp);

-- Table with data re-sampled to bigger (15 sec) time steps
CREATE TABLE t_resampled_timeseries_15_sec
(
    metric_id UInt64,
    grid_timestamp DateTime('UTC') CODEC(DoubleDelta, ZSTD), -- Timestamp aligned to 15 sec
    samples AggregateFunction(timeSeriesLastTwoSamples, DateTime64(3, 'UTC'), Float64)
)
ENGINE = AggregatingMergeTree()
ORDER BY (metric_id, grid_timestamp);

-- MV for populating re-sampled table
CREATE MATERIALIZED VIEW mv_resampled_timeseries TO t_resampled_timeseries_15_sec
(
    metric_id UInt64,
    grid_timestamp DateTime('UTC') CODEC(DoubleDelta, ZSTD),
    samples AggregateFunction(timeSeriesLastTwoSamples, DateTime64(3, 'UTC'), Float64)
)
AS SELECT
    metric_id,
    ceil(toUnixTimestamp(timestamp + interval 999 millisecond) / 15, 0) * 15 AS grid_timestamp, -- Round timestamp up to the next grid point
    initializeAggregation('timeSeriesLastTwoSamplesState', timestamp, value) AS samples
FROM t_raw_timeseries
ORDER BY metric_id, grid_timestamp;

-- Insert some data
INSERT INTO t_raw_timeseries(metric_id, timestamp, value) SELECT number%10 AS metric_id, '2024-12-12 12:00:00'::DateTime64(3, 'UTC') + interval ((number/10)%100)*900 millisecond as timestamp, number%3+number%29 AS value FROM numbers(1000);

WITH
    '2024-12-12 12:00:15'::DateTime64(3,'UTC') AS start_ts,       -- start of timestamp grid
    start_ts + INTERVAL 60 SECOND AS end_ts,   -- end of timestamp grid
    15 AS step_seconds,   -- step of timestamp grid
    45 AS window_seconds  -- "staleness" window
SELECT
    metric_id,
    timeSeriesInstantDeltaToGrid(start_ts, end_ts, step_seconds, window_seconds)(timestamps, values),
    timeSeriesInstantRateToGrid(start_ts, end_ts, step_seconds, window_seconds)(timestamps, values)
FROM (
    SELECT
        metric_id,
        finalizeAggregation(samples).1 AS timestamps,
        finalizeAggregation(samples).2 AS values
    FROM t_resampled_timeseries_15_sec
    WHERE metric_id = 3 AND grid_timestamp BETWEEN start_ts - interval window_seconds seconds AND end_ts
)
GROUP BY metric_id;
```

```response title=Response theme={null}
3    [11,8,-18,8,11]    [12.222222222222221,8.88888888888889,1.1111111111111112,8.88888888888889,12.222222222222221]
```